When energy use and precise temperature / humidity control are all factors in your application, the SCA6000 is a package that satisfies your warm weather requirements. Food, pharmaceuticals, specialty manufacturing, even industrial paint shops, all require tight controls on temperature and humidity. Commercial buildings such as museums, hospitals and even schools have specified humidity and temperature requirements.

The Subcooled Air SCA6000 is a complete warm weather climate control package. Air supplied to the unit is cooled to 40 degrees Fahrenheit to dry the air. If desired, the air can then be heated by up to 50 degrees Fahrenheit before being delivered to the work space. Supply air is thermostatically controlled for both temperature and dewpoint. A high static blower delivers air through up to 1000 feet of duct. Electric power savings can easily be 50% when compared to desiccant dehumidifiers. Moisture removal is twice that of desiccant dehumidifiers when inlet air is hot and humid.

An energy recovery loop allows up to 25 percent more air to be dehumidified with the same refrigeration tonnage. Circulating water and glycol through the energy recovery coils pre-cools hot outside air before it is refrigerated in the evaporator coils. A second energy recovery coil heats air slightly after it has been refrigerated.

Cold, dry air can be heated to 90 degrees Fahrenheit with a condenser reheat coil. Typical air conditioners use power hungry electric heat strips. Condenser reheat provides warm, dry air without the power cost of electric heaters. The energy efficiency of this heat source is over 150 times greater than using electric heat strips. The electric savings compared to a 50kW electric heater is over $100.00 per day.